Setting CIMIS Bulletin Board System Properties
CIMIS (California Irrigation Management Information System) is an electronic
bulletin board system that collects weather station data from across California for
use by the irrigation industry. If you have selected your weather source to be a
CIMIS Bulletin Board System, you will need to complete the CIMIS sheet.
To set CIMIS properties:
1
With the Weather Source Properties Setup dialog box open, select the CIMIS
BBS tab.
The CIMIS BBS sheet comes to the front of the stack.
CIMIS BBS Sheet
2
Set the CIMIS properties as described in this section.
3
When you are finished setting CIMIS properties, you can select another
tabbed sheet or click OK to save your changes and close the dialog box, Apply
to save your changes without closing the dialog box, or Cancel to cancel your
changes and close the dialog box.
Setting Weather Source Properties
5.9
To Next Page
Loading...
Need help?
General
