Restoring a Window
The Restore option and Restore button allow you to return the window to its
previous size after the window has been maximized or minimized.
To restore the window:
Click the Restore window button or select the Restore option from the
Application menu.
The window returns to its previous size.
Moving a Window
You can use the Move option or the mouse to change the position of a window on
your screen.
To move the window:
1
Select the Move option from the Application menu, then with the arrow
positioned over the title bar, drag the window or use the arrow keys to move
the window to the desired position on your screen.
2
Press the Enter key to end the operation.
Resizing a Window
The Restore, Maximize, and Minimize options and the Maximize and Restore
window buttons allow you to change the size of the windows on your screen.
To change the size of the window:
Select the Restore, Maximize, or Minimize option from the Application menu
or click the Maximize or Restore window buttons.
The size of the window changes according to your choice.
Closing a Window or Windows
To close the window:
Click the Close button on the window or select the Close option from the
appropriate menu. (Site and Weather menus have close options).
The active window closes.
To close all open windows:
Select the Close All option from the Window menu.
All windows close except the System window, Central window,
Communications window and Event Log window.
Getting to Know Maxicom
2
2.12
Using the Application menu
or the window buttons on
the System window affects
the entire application.
If the window is maximized
(it fills the entire screen), the
Move option is not available
on the Application menu.
If the System, Maxicom
2
Central, Communications
Status and Event Log
windows are the only
windows open, the Close All
option is not available on the
Window menu.
To Next Page
Loading...
Need help?
General
