Rain Bird Maxicom2 User Manual

Using the Weather Properties Setup Dialog Box
for Setup
To use the Weather Source Properties Setup dialog box to set up your weather
source:
1 Select the Properties option from the Weather menu. (If the active window is
not a Weather Source window, the Properties option is not available.)
The Weather Source Properties Setup dialog box is displayed.
Weather Source Properties Setup Dialog Box
2 Select either of the tabbed sheets to bring that sheet to the front of the stack.
Available sheets are the Weather Source Type and one of the following,
depending upon what type of weather source is selected on the Type sheet:
• Rain Bird Weather Station
• CIMIS Bulletin Board System (California only)
• CCU-Based ET Gauge
• CCU-Based Site Rain Counter (SRC)
• Historical ET Database
• User-Entered Weather Data
3 Follow the instructions in this chapter for the sheet you have selected.
Setting Weather Source Properties
5.3

Rain Bird Maxicom2 Specifications

General

Brand	Rain Bird
Model	Maxicom2
Category	Control Systems
Language	English