3
Enter the type of currency in the System Default Currency field.
4
Enter the prefix for the currency (e.g., $) in the Prefix field.
5
Enter the water price (between 0.00 and 9999.99) in the System Default Water
Price field.
6
Click on the preferred time format: 24 or 12 hours.
7
Select any other preferences you would like to choose: Enable Maxicom
2
Sound, Run Virtual CCU at Auto Send Time and Enable Maxicom
2
Warning
System.
8
When you are finished making your Preference selections, you can select
another tabbed sheet or click OK to save your changes and close the dialog
box, Apply to save your changes without closing the dialog box, or Cancel to
cancel your changes and close the dialog box.
Setting Station Property Macros
Macros allow you to create shortcuts for certain items and their values that you
use often in Maxicom
2
. Once you enter a macro, Maxicom
2
will automatically
remember it the next time you need to enter it.
To set a station macro:
1
With the System Properties Setup dialog box open, select the Station Property
Macros tab.
The Station Property Macros sheet comes to the front of the stack.
Setting System Properties
3.12
Setting the estimated cost
per unit of water allows
Maxicom
2
to calculate water
costs for you.
To Next Page
Loading...
Need help?
General
