Rain Bird Maxicom2 - Recommended Hardware and Software Requirements; Remote Access Requirements

Installing Maxicom
2
1.2
Maxicom
2
does not require more than 100 megabytes of hard disk space above
the operating system for a full installation. Actual disk space requirements may be
greater with use, depending upon the amount of logged historical data and the
number of sites. Maxicom
2
is not designed to operate on a computer with a non-
Intel Pentium-based microprocessor for the primary central processing unit.
Recommended Hardware and Software Requirements
The following are the recommended requirements for running Maxicom
2
:
• Pentium® III 450 MHz or faster processor
• 64 megabytes RAM
• VGA monitor
• 101-key standard AT keyboard
• 4 GB hard disk drive
• 3.5 inch floppy disk drive
• CD-ROM drive
• mouse
• 56 K telephone modem
• four free serial ports
• Windows95/98 or NT software
• sound card and speakers
• printer
Remote Access Requirements
If you want to access Maxicom
2
from a remote computer, you will need:
• PC Anywhere32
• a dedicated modem
All Maxicom
2
functionality available on the central computer is available on the
remote computer via PC Anywhere32. PC Anywhere32 is the only remote access
method supported by Maxicom
2
. PC Anywhere32 is provided when you purchase
Maxicom
2
.