Rain Bird Maxicom2 User Manual

Editing CCU Properties
Setting CCU properties is accomplished in the CCU setup spreadsheet, which lists
the devices controlled by the CCU and the stations for each of those devices.
Before you begin to fill in the CCU setup spreadsheet, it is helpful to obtain the
following information:
• types of controllers used with the CCU and the channel number for each
• types of decoders used with the CCU and the channel numbers for each
• landscape coefficient for each station on each satellite
• maximum cycle and minimum soak time for each station on each satellite
• precipitation rate for each station on each satellite
• flow rate for each station on each satellite
• which stations are in each FLO WATCH zone
• which stations are in which FLO-MANAGER zone
When setting up a site’s CCU, it is also helpful to number channels in a systematic
way. Some examples of systematic organization for channel numbers are:
• by flow zone
• by controller identification numbers on irrigation drawings
• by device type
To display the CCU Setup spreadsheet:
1 Select CCU Properties from the Site menu.
The CCU Setup spreadsheet is displayed.
Setting Site Properties
4.18

Rain Bird Maxicom2 Specifications

General

Brand	Rain Bird
Model	Maxicom2
Category	Control Systems
Language	English