Rain Bird Maxicom2 User Manual

CCU Setup Spreadsheet
2 Set up the device types and station properties as described in this section.
3 When you are finished setting up device types and station properties, click OK
to save your changes to the CCU Setup spreadsheet and close the spreadsheet
or click Cancel to cancel your changes and close the spreadsheet.
The CCU Setup spreadsheet is designed so that you can set up the CCU station by
station, one device (channel) at a time. The radio buttons at the top of the CCU
Setup spreadsheet allow you to select what property is displayed on the
spreadsheet. You can choose to display any one of the following properties:
• flow rate
• cycle time
• soak time
• landscape coefficient
• precipitation rate
• FLO WATCH zone
• FLO-MANAGER zone
• Decoder/Sensor setting
We recommend that you fill in the spreadsheet one device at a time. You can elect
to fill in all the properties for a particular station before moving on to the next
station or you can fill in all the stations for a particular property before moving on
to the next property, whatever works best for you.
Setting Site Properties
4.19
Device columns contain the
number of editable cells
corresponding to the
number of stations available
on that type of device. For
example, if the device is a
Site Rain Counter, no cells in
that column are editable; if
the device type is a 24-
station satellite controller, 24
cells in the column are
editable.

Rain Bird Maxicom2 Specifications

General

Brand	Rain Bird
Model	Maxicom2
Category	Control Systems
Language	English