Getting Logged Weather Source Data
You can receive logged information from a weather source to update your site’s
weather source database before the scheduled automatic contact.
To get logged data:
1
With the Weather Source window open, select Get Logged Data from the
Weather menu.
The Get Weather Logs dialog box is displayed.
2
You can specify how many days of weather data you want to retrieve from the
weather source in two ways.
• Check the Auto Detected checkbox if you would Maxicom
2
to retrieve all
the data since the last weather source contact. If no contact has ever been
made, Maxicom
2
will gather 30 days of data.
• Enter the number of days of weather data you would like to retrieve in the
Days field. Or, use the scroll buttons on the right side of the field to select
the days without typing.
3
Click the OK button.
The dialog box shows you the progress of the update of your database. You can
interrupt the update at any time by clicking the Close button.
The dialog box will automatically close when it is finished transferring
information.
Editing Weather Source Properties
The Weather Properties Setup dialog box has two tabbed sheets that allow you to
edit the properties of a weather source, including its name, password and type.
To edit the weather source properties:
1
Select Properties from the Weather menu or click the Weather Source
Properties button on the Weather Source toolbar.
The Weather Properties Setup dialog box opens.
2
Follow the directions in “Using the Weather Properties Setup Dialog Box for
Setup” on page 5.3 for help in editing the properties.
Viewing and Editing Weather Source Data
8.10
To Next Page
Loading...
Need help?
General
