• Communication Status (accelerator = S)
Allows you to view the status of communication on any port configured for
Maxicom
2
. For more information, see “Viewing Maxicom
2
’s Communication
Status” on page 10.1.
• Event Log (accelerator = E)
Allows you to view event log data that you can sort, filter and use to create a
report. For more information, see “Viewing the Event Log and Generating
Reports” on page 9.1.
• Print Setup (accelerator = U)
Allows you to change printer parameters such as paper size, orientation, and
properties for the selected printer. For more information about printing, see
your Windows95/98 user manual.
• Print Preview (accelerator = V)
Allows you to see what the currently selected document will look like when
printed. For more information about printing, see your Windows95/98 user
manual.
• Print (accelerator = P)
Allows you to select the number of copies, the printer, and other printing
options. For more information about printing, see your Windows95/98 user
manual.
• Backup (accelerator = B)
Allows you to backup the current data to the hard drive. For more
information, see “Backing Up Data” on page 11.1.
• Recently opened sites, weather sources and reports
Allows you to quickly open up to nine existing sites, weather sources or
reports. When you initially open a site, weather source or report, it is
automatically appended to the System menu and is automatically assigned an
accelerator key (1, 2, 3, etc.). The most recently opened site, weather source or
report is assigned the “1” accelerator key and the other recently opened items
on the menu move down one position.
• Exit (accelerator = X)
Exits the Maxicom
2
interface and terminates any manual connections. For
more information, see “Exiting the Maxicom
2
Interface” on page 2.36.
Getting to Know Maxicom
2
2.15
To Next Page
Loading...
Need help?
General
