B-SERIES INSTALLATION, OPERATION AND SERVICE MANUAL
2 of 147
outdoor storage.
1.3 Safety Labels and Their Placement
Product safety signs or labels should be replaced by
product user if they are no longer legible. Please
contact Rapid Engineering LLC or your RAPID
®
independent distributor to obtain replacement signs
or labels. See Page 3, Figure 1 through Page 4,
Figure 3.
1.4 California Proposition 65
In accordance with California Proposition 65 require-
ments, a warning label must be placed in a highly
visible location on the outside of the equipment (i.e.,
near equipment's serial plate). See label placement
drawing on Page 3, Figure 1 through Page 4, Figure
3 for label location. Avoid placing labels on areas
with extreme heat, cold, corrosive chemicals or other
elements. To order additional labels, please contact
Rapid Engineering LLC or your RAPID
®
independent
distributor.
To Next Page
Loading...