66
[Data Compare]: Sets the data condition.
[Compare]: Checking this box compares data.
[Use Mask]: Sets a mask condition (available when [Compare] has been selected).
[Value]: Specifies the data bus value as numerics. The size of data for access can also be
selected (available when [Compare] has been selected).
[Byte]: Sets access in bytes as the condition (available when [Compare] has been selected).
[Word]: Sets access in words as the condition (available when [Compare] has been selected).
[Mask]: Sets a value to be masked. This value will be ANDed with the value of the data bus
and data condition. The result will be used to compare data (available when [Use
Mask] has been selected).
[Direction]: Selects a condition with read or write cycles.
[Read]: Sets read cycles as the condition.
[Write]: Sets write cycles as the condition.
[Either]: Sets either read or write cycles as the condition.
To Next Page
Loading...
