RL78/F13, F14 CHAPTER 17 LIN/UART MODULE (RLIN3)
R01UH0368EJ0210 Rev.2.10 1124
Dec 10, 2015
FERE bit (framing error detection enable bit)
The FERE bit enables or disables detection of the framing error.
Set 1(the framing error detection enables) to this bit.
The framing error detection result is indicated in the FER flag in the LESTn register.
For details of the framing error, refer to 17.4.6 Error Status.
LTES bit (timeout error select bit)
The LTES bit selects the specific timeout function to be used.
With 0 set, the timeout function applies to frame timeout.
With 1 set, the timeout function applies to response timeout.
For details of the timeout error, refer to 17.4.6 Error Status.
<R>
To Next Page
Loading...
Need help?
General
