Component Layout
D353 14 SM
Symbol Name Function Index No.
Switches
SW1 Right Door
Detects whether the right door is open
and starts to drive the tray lift motor.
6
SW2 Front LCT Set Detects whether the LCT is correctly set. 1
SW3 Rear LCT Set Detects whether the LCT is correctly set. 2
SW4 Down
Lowers the tray to the paper supply
position if pressed.
8
Magnetic Clutches
MC1 Paper Feed Drives the paper feed unit. 3
Solenoids
SOL1 Pick-up Pushes the pick-up roller up or down. 11
PCBs
PCB1 Main
Controls the LCT and communicates with
the copier/printer.
7
To Next Page
Loading...
