System SP Table-6
SM Appendix 4-153 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
4.6 SYSTEM SP TABLE-6
4.6.1 SP6-XXX: PERIPHERALS
6006*
ADF Registration Adjust
Adjusts the side-to-side and leading edge registration for simplex and
duplex original feeding in ARDF mode. Press
to toggle ±.
SP6006-5 sets the maximum setting allowed for rear edge erase.
001 Adjust Side-to-Side: 1st Side
[–3 to 3 / 0 / 0.1 mm / step]
002 Adjust Side-to-Side: 2nd Side
003 Leading Edge
[–5 to 5 / 0 / 0.1 mm / step]
005 Leading Edge: 1st Side
[–3 to 3 / 0 / 0.1 mm / step]
006 Leading Edge: 2nd Side
[–2.5 to 2.5 / 0 / 0.1 mm / step]
007 Trailing Edge Erase
[–10 to 10 / 0 / 0.1 mm / step]
6007 ADF Input Check
001 Original B5 Sensor
0: Paper not detected
1: Paper detected
002 Original A4 Sensor
003 Original LG Sensor
004 Original Width Sensor 1
005 Original Width Sensor 2
006 Original Width Sensor 3
007 Original Width Sensor 4
008 Original Width Sensor 5
009 Original Set Sensor
To Next Page
Loading...
