Installation for Key Counter
SM 31 B838
Scanner
Accessibility
Option
B838
1.8 INSTALLATION FOR KEY COUNTER
1. Cut off and remove the parts [1] with
a cutter.
2. Attach the key counter front bracket
[2] and rear bracket [3] to the
reverse side of the top right cover (
x 4; screw 2-tapping M3x8).
3. Put the key counter
harness [4] into the
machine.
4. Connect the key counter
harness to the connector
[5] of the right side of the
controller box.
5. Install the top rear cover ( step 28 in "Connecting Procedure for
Mainframe")
B838I122.WMF
[4]
[5]
[1]
[2]
[3]
To Next Page
Loading...
