Service Call Conditions
SM Appendix 3-13 D009/D011/D012/D013/D091/D092
Appendix:
Service Call
Conditions
SC Tables: SC4xx
400 D
Vsg adjustment error
Vsg is more than 4.2V or 3.8V or less when the machine adjusts Vsg value.
Dirty or defective ID sensor
Defective ID sensor shutter
440 D
Transfer belt bias error
The feed back bias from the transfer belt is more than 4V for 60 msec while
the transfer belt bias is output.
The A/D conversion level is 20 or less for 60 msec.
The PWM duty is 24% or more for 60 msec.
Power pack broken
Defective harness
Disconnected connector
441 D
Transfer/Development motor error
The machine detects a lock signal error from the transfer/development motor
for 2 seconds after the transfer/development motor turned on.
Overload on the motor
Defective transfer/development motor
Defective harness
Defective IOB
To Next Page
Loading...
