Ricoh D009 - Sp3-XXX (Tel Line Settings)

Service Tables
SM 47 D346
Fax Option
Type 5000
D346
Dump board.
004 G4 Memory Dump Not used
G3-1 NCU Parameters
103
001 – 023 CC, 01 – 22
NCU parameter settings for the standard G3
board.  "NCU Parameters"
G3-2 NCU Parameters
104
001 – 023 CC, 01 – 22
NCU parameter settings for the optional G3
board.  "NCU Parameters"
G3-3 NCU Parameters
105
001 – 023 CC, 01 – 22
NCU parameter settings for the optional G3
board.  "NCU Parameters"
4.2.3 SP3-XXX (TEL LINE SETTINGS)
3
Mode No. Function
Service Station
001 Fax Number Enter the fax number of the service station.
101
002 Select Line Select the line type.
Serial Number
102
000 Enter the fax unit’s serial number.
PSTN-1 Port Settings
001 Select Line
Select the line type setting for the G3-1 line. If
the machine is installed on a PABX line, select
“PABX”, “PABX(GND)” or “PABX(FLASH)”.
103
002
PSTN Access
Number
Enter the PSTN access number for the
G3-1 line.