Ricoh D009 - App 2 Me Setting (D091;D092 Only); Settings Relevant to the Service Contract

Main Machine Installation
SM 2-17 D009/D011/D012/D013/D091/D092
Installation
Settings Relevant to the Service Contract
Change the necessary settings for the following SP modes if the customer has made a
service contract.
Item SP No. Function Default
A3/11" x 17"
double
counting
SP5-104-001
(SSP)
Specifies whether the counter is
doubled for A3/11" x 17" paper.
When you have to change this
setting, contact your supervisor.
"No": Single
counting
Service Tel.
No. Setting
SP5-812-001
through 004
5812-002 programs the service
station fax number. The number is
printed on the counter list when
the meter charge mode is
selected. This lets the user fax the
counter data to the service
station.
App 2 Me Setting (D091/D092 only)
D091/D092 models have VM Card including "App 2 Me" provider by default. Do the
following procedure if a customer want to use the "App 2 Me".
1. Press "User Tools" key on the operation panel.
2. Touch the "Extended Feature Settings" button twice.
3. Touch the "App 2 Me" line in the Startup Setting tab.
4. Touch the "Extended Feature Info" tab on the LCD.
5. Touch the "App 2 Me" line.
6. Set the setting of "Auto Start" to "On".
7. Touch the "Exit" button.
8. Exit the "User Tools" settings.