Main Machine Installation
D009/D011/D012/D013/D091/D092 2-18 SM
Update Procedure for App 2 Me Provider
1. Push the "User/Tools" key.
2. If an administrator setting is registered for the machine, step 2 and 3 are required.
Otherwise, skip to step 4.
3. Push the "Login/Logout" key.
4. Login with the administrator user name and password.
5. Touch "Extended Feature Settings" twice on the LCD.
6. Touch the all applications. Then, the status will be changed to "Stop".
7. Turn off the machine. And then remove the VM Card.
8. Prepare newer App 2 Me Provider zip file from Firmware Download Center. Unzip the
zip file. (The folder name is "337051920".) And then copy the App 2 Me Provider folder
in the specified path of VM card. The path is "SD_Card
Drive¥ sdk¥dsdk¥dist¥337051920" as shown above.
9. Turn the SD card label face to the rear of the machine. Then push it slowly into slot 2
until you hear a click.
10. Turn on the main power switch.
11. Press the "User Tools" key on the operation panel.
12. Touch the "Extended Feature Settings" button twice.
13. Touch the "Extended Feature Info" tab on LCD.
14. Touch the "App2Me" line.
15. Set the setting of the "Auto Start" to "On".
16. Touch the "Exit" button.
17. Exit the "User Tools/Counter" settings.
To Next Page
Loading...
