Controller Options
D009/D011/D012/D013/D091/D092 2-90 SM
2.21.7 POSTSCRIPT 3
Unplug the main machine power cord before you do the following procedure.
1. Remove the slot cover [1] (
x 1).
2. Turn the SD-card label face [2] to the rear of the machine. Then push it slowly into slot
1 until you hear a click.
3. Attach the slot cover [1] (
x 1).
4. Attach the "Adobe PostScript 3" decal [3] to the front door.
5. Make sure that the machine can recognize the option (
"Check All Connections" at
the end of this section).
To Next Page
Loading...
