Using SP Modes
SM 5-13 D009/D011/D012/D013/D091/D092
Service
Tables
5.3.7 COPIER SETTING RESET
The copy settings in the UP mode can be reset to their defaults. Use the following
procedure.
1. Press User Tools/Counter
.
2. Hold down
and then press Copier/Document Server Settings.
You must press
first.
3. When the message prompts you to confirm that you want to reset the Copier
Document Server settings, press "Yes".
4. When the message tells you that the settings have been reset, press "Exit".
To Next Page
Loading...
