Installation Requirements
SM 2-1 D009/D011/D012/D013/D091/D092
Installation
2. INSTALLATION
2.1 INSTALLATION REQUIREMENTS
Never turn off the main power switch when the power LED is lit or flashing. To
avoid damaging the hard disk or memory, press the operation power switch to
switch the power off, wait for the power LED to go off, and then switch the main
power switch off.
Install the machine in a safe place for keeping security.
Make sure that the operation instructions are kept at a customer's hand.
The main power LED lights or flashes while the platen cover or ARDF is open,
while the main machine is communicating with a facsimile or the network server, or
while the machine is accessing the hard disk or memory for reading or writing
data.
Rating voltage for peripherals: Make sure to plug the cables into the correct
sockets.
To Next Page
Loading...
