Main Machine Installation
SM 2-15 D009/D011/D012/D013/D091/D092
Installation
Set Paper Size for Paper Trays
1. Press User Tools/Counter .
2. On the touch panel, press "System Settings".
3. Press the "Paper Size Setting" tab.
4. Press the button for the tray to change.
5. Change the setting and press the [OK] button.
6. Repeat for each tray installed.
7. Press Exit twice to return to the main display
The 1st, 2nd, 3rd, and 4th paper trays are provided with the paper size switches.
The detected paper size by the paper size switches has priority over the UP
settings. However, if you change the "Auto Detect" with the UP setting, you can
select the paper size.
8. Check the copy quality and machine operation.
Electrical Total Counter
The electrical total counter no longer requires initialization. The new incrementing counter
is set to "0" at the factory.
To Next Page
Loading...
