Ricoh D009 - Installing a New Web Holder Roller; Installing New Web Rollers

Fusing
D009/D011/D012/D013/D091/D092 4-60 SM
Installing a new web holder roller
The holder [A] has a one-way clutch. Make sure that the holder [A] is set at the front side.
Installing new web rollers
1. Install the web supply roller [A] first (
). Make sure that the web sheet is under
the pin [B].
2. Install the web take up roller [C] (
). Make sure that the printed number [D] is
outside the web take up roller.
3. Reinstall the rear gear bracket (
p.4-58).
4. Reinstall the front and rear gears and bushings (
p.4-58).
5. Reinstall the rear gear bracket (
p.4-58).