Connecting Procedure for Mainframe
B838 30 SM
30. Attach the three caps [25] to the
screw holes on the top right cover.
31. Install the ring core [26]
(TFCM-41-27-16) to the bound
cables and the cores [27] (RFC-13)
to the other cables.
32. Install the cable cover [28] in the
top rear cover.
33. Follow the "INSTALLATION
REQUIREMENTS" to place the
scanner accessibility unit for safety.
34. After installation, adjust the scanner
image ( "Image Adjustment" >
"Scanning" in the chapter
"Replacement and Adjustment" of
the Model B222/B224 SERVICE
MANUAL)
B838R954.PNG
B838R955.PNG
B838R957.PNG
To Next Page
Loading...
