Ricoh D009 - Page 118

Tray Heater (Optional Paper Feed Unit)
D009/D011/D012/D013/D091/D092 2-72 SM
8. Replace the shoulder screw [7] with the washer screw [8], using the securing bracket
[9] (
x 1).
9. Connect the harness [10] to the connector [11] of the tray heater.
10. Route the harness [10] as shown and clamp it with four clamps (
x 4).
11. Connect the harness [10] to the connector [12] of the mainframe.
12. Remove the connector cover [13] (
x 1).