Controller Options
D009/D011/D012/D013/D091/D092 2-92 SM
4. Remove the slot cover [1] (
x 1).
5. Insert the IPDS SD Card [2] into slot 1.
If slot 1 is occupied, insert it in to slot 2, then merge this application into slot 1.
Pushing in the SD Card releases it for removal. Make sure the SD Card is
inserted and locked in place. If it is partially out of the slot, push it in gently
until it locks in place.
6. Reattach the slot cover and turn ON the main switch.
7. Do one of the following ("A" or "B") to enable the IPDS function.
A. [Enable the IPDS function via telnet]
1. Connect the machine via telnet.
2. Execute the following commands:
msh> set ipds up
***If you want to stop the function.
msh> set ipds down
B. [Enable the IPDS option via WebImageMonitor]
1. Log in to WebImageMonitor.
2. Change the setting to enable IPDS.
To Next Page
Loading...
