Controller Options
SM 2-113 D009/D011/D012/D013/D091/D092
Installation
Press "Extended Feature Settings" on the LCD again.
Press "Startup Setting" tab.
Stop all SDK applications with touching application lines.
Exit the UP mode, and then turn off the machine.
2. Turn off the copier.
3. Remove the cover (
x1).
4. Remove the VM card from SD card slot 2 if installed.
5. Confirm that the RPCS Unit or Printer Unit SD card is in SD card Slot 1.
6. Put the option SD Card (Printer Enhance Option or Scanner Enhance Option) in SD
card slot 2.
7. Open the front door.
8. Turn the copier on.
9. Go into the SP mode and select SP5873-001.
10. Touch "Execute".
11. Read the instructions on the display and touch "Execute" to start.
12. When the display tells you copying is completed, touch "Exit", then turn the copier off.
13. Remove the option SD card from slot 2.
14. Turn the copier on.
15. Go into the User Tools mode and confirm that update was successful.
To Next Page
Loading...
