Service Call Conditions
D009/D011/D012/D013/D091/D092 3-24 SM Appendix
622 D
Paper feed unit communication error
While the IOB communicates with a peripheral, an SC code is displayed if
one of following conditions occurs.
The IOB receives the break signal which is generated by the peripheral
only just after the main switch is turned on.
The IOB receives the break signal which is generated by URAT.
Defective main control board of the peripheral
Defective BICU or IOB
Disconnected peripheral
623 D
2nd Paper Bank communication error
This SC is not issued for this machine.
When a communication error signal between the 1st paper bank and 2nd
paper bank is received.
Loose connector
630 C
CSS communication error
A communication error occurred during communication with the CSS.
Communication line error
632 B
MF accounting device error 1
The controller sends data to the accounting device, but the device does not
respond. This occurs three times.
Loose connection between the controller and the accounting device
To Next Page
Loading...
