Service Call Conditions
D009/D011/D012/D013/D091/D092 3-40 SM Appendix
819 C
Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing.
One of the following messages was displayed on the operation panel.
0x6261 6261 6420 6469 7200 00 -> "bad dir"
0x696e 0x69742064 -> "init died"
0x766d 0x5f706167 -> "vm_pageout: VM is full"
554C UL (USB error)
---- Error in the OS
"init died", "vm_pageout: VM
is full", "Cache Error"
System program defective
Controller board defective
Optional board defective
Replace controller firmware
For more details about this SC code error, execute SP5990 to print an SMC report
so you can read the error code. The error code is not displayed on the operation
panel.
To Next Page
Loading...
