System SP Table-4
SM Appendix 4-41 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
4012*
Scanner Erase Margin: Scale
Adjusts scanning margins for the leading and trailing edges (sub scan) and
right and left edge (main scan).
Do not adjust unless the customer desires a scanner margin
greater than the printer margin.
These settings are adjusted to erase shadows caused by the gap
between the original and the scale of the scanner unit.
001 Book: Leading Edge
[0 to 3 / 1 / 0.1 mm]
002 Book: Trailing Edge
[0 to 3 / 0 / 0.1 mm]
003 Book: Left
[0 to 3 / 1 / 0.1 mm]
004 Book: Right
[0 to 3 / 0 / 0.1 mm]
005 ADF: Leading Edge
[0 to 3 / 0 / 0.1 mm]
007 ADF: Right
[0 to 3 / 0 / 0.1 mm]
008 ADF: Left
[0 to 3 / 0 / 0.1 mm]
4013
Scanner Free Run
Performs a scanner free run with the exposure lamp on or off.
001 Lamp: ON
[0 to 1 / 0 / 1]
0=Off, 1=On
002 Lamp: OFF
4014 Scanner Free Run
001 HP Detection Enable Scanner free run with HP sensor check.
002 HP Detection Disable Scanner free run without HP sensor check.