Ricoh D009 - Page 475

System SP Table-4
SM Appendix 4-43 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
4301
APS Sensor Output Display
Displays a code that represents the original size detected by the original
sensors. (
p.4-236 "Input Check")
4303*
APS A5/LT Size Detection
Determines whether an original of non-standard size is detected as A5/HLT
size by the APS sensor.
0: No original
1: A5/HLT- lengthwise (SEF)
2:A5/HLT - Sideways (LEF)
If "0" is selected, "Cannot detect original size" will be displayed.
4305
Original Size Detection
[0 to 3 / 0 / 1 step]
0: Normal Detection ( the machine detects A4/LT size as A4 or LT,
depending on the paper size setting)
1: A4-sideways LT-Lengthwise
2: LT-sideways A4-Lenghtwise
3: 8K 16K
4400*
Scanner Erase Margin
These SPs set the area to be masked during platen (book) mode scanning.
001 Book: Leading Edge
[0 to 3 / 0 / 0.1 mm]
002 Book: Trailing Edge
003 Book: Left
004 Book: Right
005 ADF: Leading Edge
[0 to 3 / 2 / 0.1 mm]
007 ADF: Right
[0 to 3 / 0 / 0.1 mm]