Ricoh D009 - Page 477

System SP Table-4
SM Appendix 4-45 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
4429* ICI Output Selection
001 Copy
Adjusts the density of the embedded message
with the copy data security unit.
[0 to 3 / 3 / 1 ]
3: Darkest density
002 Scanner
003 Fax
4450* Scan Image Path Selection
001
Black Reduction ON/OFF
[0 to 1 / 1 / 1] 0=OFF, 1=ON
Uses or does not use the black reduction image path.
002
SH ON/OFF
[0 to 1 / 0 / 1] 0=OFF, 1=ON
Uses or does not use the shading image path.
4460*
Digital AE Setting
Specifies the level of deleting the background in the ADS mode. You can
adjust its level for each scanning method (platen, ADF).
001 Lower Limit
CS: [0 to 1020 / 364 / 4 digit]
MS: [0 to 1020 / 408 / 4 digit]
002 Background Level
[512 to 1535 / 972 / 1 digit]