System SP Table-4
SM Appendix 4-49 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
4602 Scanner Memory Access
001 Scanner Memory Access
Enables the read and write check for the
SBU registers.
002 Address Setting
Not used
003 Data Setting
4603 AGC Execution
002 HP Detection Enable Executes the AGC with the scanner detection.
003 HP Detection Disable Executes the AGC with the scanner detection.
4604
FGATE Open/Close
Opens or closes the FGATE signal. This SP automatically returns to the
default status (close) after exiting this SP.
[0 to 1 / 0 / 1]
0: OFF, 1: ON
4606
White Balance Target: R
This value is the target value of red for the white level adjustment (CS model
only).
[0 to 1023 / 784 / 1 digit]
4607 White Balance Target: G
001
This value is the target value of green for the white level adjustment.
CS: [1023 to 0 / 784 / 1 digit]
MS: [1023 to 1 / 876 / 1 digit]
To Next Page
Loading...
