System SP Table-5
D009/D011/D012/D013/D091/D092 4-96 SM Appendix
5505*
Error Alarm
Sets the number of sheets to clear the error alarm counter.
The error alarm counter counts "1" when any SC is detected. However, the
error alarm counter decreases by "1" when an SC is not detected during a
set number of copied sheets (for example, default 5000 (C1b) or 10000
(C1c) sheets). The error alarm occurs when the SC error alarm counter
reaches "5".
[0 to 255 / 50 (C1b/C1.5b), 100 (C1c/C1.5c) / 100 copies / step]
5507* Supply Alarm
001
Paper supply Alarm
(0:Off 1:On)
Switches the control call on/off for the paper
supply. (DFU)
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified
number transfer sheets for each paper size (A3,
A4, B4, B5, DLT, LG, LT, HLT)
002
Staple Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the stapler
installed in the finisher. (DFU)
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
003
Toner Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the toner end.
(DFU)
0: Off, 1: On
If you select "1" the alarm will sound when the
copier detects toner end.
128 Interval: Others The "Paper Supply Call Level: nn" SPs specify the
paper control call interval for the referenced paper
sizes. (DFU)
[250 to 10000 / 1000 / 1 Step]
132 Interval: A3
To Next Page
Loading...
