System SP Table-5
SM Appendix 4-109 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
068
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
1
Request for certification update in progress. The current certification
has expired.
2
An SSL error notification has been issued. Issued after the certification
has expired.
3
Notification of shift from a common authentication to an individual
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID The ID of the request for certification.
083 Firmware Up Status Displays the status of the firmware update.
084 Non-HDD Firm Up
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
085 Firm Up User Check
This SP setting determines if the operator can
confirm the previous version of the firmware
before the firmware update execution. If the
option to confirm the previous version is selected,
a notification is sent to the system manager and
the firmware update is done with the firmware
files from the URL.
To Next Page
Loading...
