Ricoh D009 - Page 547

System SP Table-5
SM Appendix 4-115 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
Error Caused by
Response from GW
URL
-2385
Attempted dial up overseas without the
correct international prefix for the
telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 RCG device not managed
-2394 Device not managed
-2395 Box ID for RCG device is illegal
-2396 Device ID for RCG device is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
209 Instl Clear
Releases the machine from its Embedded RCG
Gate setup.
NOTE: Turn off and on the main power switch after
this setting has been changed.
250 CommLog Print Prints the communication log.