System SP Table-5
D009/D011/D012/D013/D091/D092 4-132 SM Appendix
022
Rapid Sending Control
[0 to 1 / 0 / -]
0: Disable, 1: Enable
Enables or disables the prevention function for the continuous data sending
error.
5846* UCS Setting
001
Machine ID (for Delivery Server)
Displays the unique device ID in use by the delivery server directory. The
value is only displayed and cannot be changed.
This ID is created from the NIC MAC or IEEE 1394 EUI.
The ID is displayed as either 6-byle or 8-byte binary.
002
Machine ID Clear (for Delivery Server)
Clears the unique ID of the device used as the name in the file transfer
directory. Execute this SP if the connection of the device to the delivery
server is unstable. After clearing the ID, the ID will be established again
automatically by cycling the machine off and on.
003
Maximum Entries
Changes the maximum number of entries that UCS can handle.
[2000 to 20000 / 2000 / 1 step]
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.
006
Delivery Server Retry Timer
Sets the interval for retry attempts when the delivery server fails to acquire
the delivery server address book.
[0 to 255 / 0 / 1 step]
0: No retries
To Next Page
Loading...
