System SP Table-6
D009/D011/D012/D013/D091/D092 4-164 SM Appendix
6150*
Jogger Control
[0 to 1 / 0 / 1 ] Not used
This SP is for the output jogger control.
6800 Sheet Conversion (Thick Paper)
Permits punching, including tab sheets.
Note: Do not change this setting.
[1 to 3 / 3 / 1 sheet]
1: 1 Sheet
2: 2 Sheets
3: 3 Sheets
6910 Shading Control
001
ON/OFF
[0 to 1 / 0 / 1 ]
0= OFF, 1= ON
Enables or disables the shading adjustment for DF mode.
002 Shading Interval: A
[0 to 60 / 3 / 1 sec] DFU
003 Shading Interval: B
[0 to 120 / 60 / 1 ] DFU
To Next Page
Loading...
