Ricoh D009 - Page 625

System SP Table-8
SM Appendix 4-193 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
8051 T:TX Jobs/DesApl
These SPs count the applications used to send
files from the document server over the telephone
line or over a network (attached to an e-mail, or as
a fax image by I-Fax). Jobs merged for sending
are counted separately.
[0 to 9999999 / 0 / 1]
The L: counter counts the number of jobs sent
from within the document server mode screen at
the operation panel.
8052 C:TX Jobs/DesApl
8053 F:TX Jobs/DesApl
8054 P:TX Jobs/DesApl
8055 S:TX Jobs/DesApl
8056 L:TX Jobs/DesApl
8057 O:TX Jobs/DesApl
 If the send is started from Desk Top Binder or Web Image Monitor, for example, then the
O: counter increments.
8061
T:FIN Jobs
[0 to 9999999 / 0 / 1]
These SPs total the finishing methods. The finishing method is specified
by the application.
8062
C:FIN Jobs
[0 to 9999999 / 0 / 1]
These SPs total finishing methods for copy jobs only. The finishing method
is specified by the application.
8063
F:FIN Jobs
[0 to 9999999 / 0 / 1]
These SPs total finishing methods for fax jobs only. The finishing method
is specified by the application.
Note: Finishing features for fax jobs are not available at this time.
8064
P:FIN Jobs
[0 to 9999999 / 0 / 1]
These SPs total finishing methods for print jobs only. The finishing method
is specified by the application.