Ricoh D009 - Page 86

Bridge Unit (D386)
D009/D011/D012/D013/D091/D092 2-40 SM
 If you will install the finisher unit (B408, B804 or B805) on the machine, install it
after installing the bridge unit (D386).
1. Remove all tapes.
2. If the sensor feeler [1] is out, fold it into the machine.
3. Open the right door of the machine.
4. Remove the upper inner tray [2].
5. Remove the front right cover [3] ( x 1).
6. Remove the connector cover [4] ( x 1).