Connecting Procedure for Scanner Unit
B838 10 SM
8. Remove the clamp [7] for the
scanner I/F cable ( x 1). This
clamp will be used hereafter.
9. Disconnect the BICU interface
harness [8] (CN310 on the SIO),
and then remove it.
10. Disconnect the power supply
harness [9] (CN311 on the SIO),
and then remove it
11. SBU cover [10] ( x 4)
12. SBU grounding plate [11] ( x 4)
13. SBU [12] ( x 4, x 2: 15 pins
connector, 30 pins connector)
B838R906.PNG
B838R907.PNG
B838R156.WMF
[11]
[12]
[10]
To Next Page
Loading...
