Connecting Procedure for Scanner Unit
B838 16 SM
31. Put the scanner I/F cable [31]
through the cutout of the scanner
rear frame.
32. Reinstall the SBU [32] ( x 4, x
2: 15 pins connector, 30 pins
connector) and ground cable of the
scanner I/F cable ( x 1).
33. Reinstall the SBU grounding plate
[33] ( x 4).
34. Reinstall the SBU cover [34] ( x
4).
35. Remove the rap on the scanner I/F
cable.
36. Attach the clamp [35] (this clamp is
removed in step 8 in the
"Connecting Procedure for Scanner
Unit") to the scanner I/F cable and
then secure it ( x 1; M3x6 blue
screw).
B838R921.PNG
B838R156.WMF
B838R922.PNG
[32]
[33] [34]
To Next Page
Loading...
