Connecting Procedure for Op Panel
B838 22 SM
8. Remove the clip tray [9] from the
scanner front cover [10].
9. Attach the scanner front cover [11]
to the operation panel ( x 2).
10. Reinstall the operation panel with
the scanner front cover [12] in the
scanner front frame ( x 6; M3x3
bind screw x 2, M3x5 bind screw x
2 on the top of the scanner front
cover, M3x8 tapping screw x 2 on
the bottom of the scanner front
cover).
11. Reinstall the scanner right cover
[13] ( x 2).
B838R933.PNG
B838R157.WMF
[12]
[13]
To Next Page
Loading...
