Connecting Procedure for Mainframe
SM 27 B838
Scanner
Accessibility
Option
B838
11. Connect three connectors [11] to
the outside of the controller box.
12. Secure the two ground cables [12]
( x 1; screw-tapping M3x6).
13. Route the scanner I/F cable [13] and connect it to CN509 (on the IPU) (= x
1).
14. Secure the scanner I/F cable with the clamp [14] ( x 1; M3x6 tapping
screw) and the ground cable [15] ( x 1; M3x6 tapping screw).
15. Remove the clamp [16].
B838R946.PNG
B838R947.PNG
To Next Page
Loading...
