Bridge Unit (D386)
D009/D011/D012/D013/D091/D092 2-42 SM
10. Reinstall the front right cover on the machine, and then close the right door of the
machine.
Open the bridge unit cover [10] when installing the front right cover. Otherwise,
you cannot reinstall it.
11. Install the optional finisher (refer to the finisher installation procedure).
Holder bracket [11] is used in the installation procedure of the finisher (B408,
B804 or B805).Do not install it at this time.
12. Turn on the main power switch of the machine.
13. Check the bridge unit operation.
To Next Page
Loading...
