Bit Switches
D346 74 SM
For example:
"1st destination + Total number of destinations: 9" in the Journal indicates a
broadcast to 9 destinations.
0: Not recorded
1: Recorded
1
I-Fax Automatic Re-dial
Setting
0: OFF
1: ON
Determines whether the I-fax automatically redials
when an error occurs.
2-7
Not Used
I-fax Switch 06 - Not used (do not change the settings) [SP No. 1-102-007]
I-fax Switch 07 - Not used (do not change the settings) [SP No. 1-102-008]
I-fax Switch 08 [SP No. 1-102-009]
No FUNCTION COMMENTS
Memory Threshold for POP Mail Reception
0-7
This setting determines the amount of SAF (Store and Forward) memory. (SAF
stores fax messages to send later for transmission to more than one location, and
also holds incoming messages if they cannot be printed.) When the amount of SAF
memory available falls below this setting, mail can no longer be received; received
mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the
amount of memory.
I-fax Switch 09 [SP No. 1-102-010]
No FUNCTION COMMENTS
To Next Page
Loading...
