Ricoh D009 - Page 967

Bit Switches
SM 77 D346
Fax Option
Type 5000
D346
Printer Switch 01 [SP No. 1-103-002]
No FUNCTION COMMENTS
0-2
Not used
Do not change the settings.
3-4
Maximum print width used in
the setup protocol
Bit 4: 0, Bit 3: 0 = Not used
Bit 4: 0, Bit 3: 1 = A3
Bit 4: 1, Bit 3: 0 = B4
Bit 4: 1, Bit 3: 1 = A4
These bits are only effective when bit 7 of printer
switch 01 is “1”.
5-6
Not used
Do not change the settings.
7
Received message width
restriction in the protocol
signal to the sender
0: Disabled
1: Enabled
0: The machine informs the transmitting machine
of the print width depending on the paper size
available from the paper feed stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting machine
of the fixed paper width which is specified by bits 3
and 4 above.
Printer Switch 02 [SP No. 1-103-003]
No FUNCTION COMMENTS
0
1st paper feed station usage
for fax printing
0: Enabled
1: Disabled
1
2nd paper feed station usage
for fax printing
0: Enabled
1: Disabled
0: The paper feed station can be used to print fax
messages and reports.
1: The specified paper feed station will not be used
for printing fax messages and reports.
 Do not disable usage for a paper feed
station which has been specified by User
Parameter Switch 0F (15), or which is