Bit Switches
SM 81 D346
Fax Option
Type 5000
D346
Printer Switch 0D - Not used (do not change the settings)
Printer Switch 0E [SP No. 1-103-015]
No FUNCTION COMMENTS
0
Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to print all
the received lines without reduction is selected first.
1
Paper size selected for
printing A4 width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is selected
for printing A4 width fax data, when the machine
has both A4 and 8.5" x 11" size paper.
2
Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
3-4
Printing the sample image on
reports
Bit 4: 0, Bit 3: 0
= The upper half only
Bit 4: 0, Bit 3: 1
= 50% reduction in sub-scan
only
Bit 4: 1, Bit 3: 0
= Same size
Bit 4: 1, Bit 3: 1
= Not used
“Same size” means the sample image is printed at
100%, even if page separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set
to “0” to enable this switch.
Refer to Detailed Section Descriptions for more on
this feature.
5-6
Not used
Do not change the settings.
7 Equalizing the reduction ratio 0: When page separation has taken place, all the
To Next Page
Loading...
