Bit Switches
D346 86 SM
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
No FUNCTION COMMENTS
0-7 IP-Fax dial interval setting
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by
following formula.
[Interval time = specified value with this switch x
0.2 msec]
Communication Switch 0A [SP No. 1-104-011]
No FUNCTION COMMENTS
0
Point of resumption of memory
transmission upon redialing
0: From the error page
1: From page 1
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
1-7
Not used
Do not change the settings.
Communication Switch 0B - Not used (do not change the settings)
Communication Switch 0C - Not used (do not change the settings)
Communication Switch 0D [SP No. 1-104-014]
No FUNCTION COMMENTS
0-7
The available memory
threshold, below which ringing
detection (and therefore
reception into memory) is
disabled
00 to FF (Hex), unit = 4 kbytes
(e.g., 06(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax
reception. If the amount of remaining memory is
below this threshold, the machine cannot receive
To Next Page
Loading...
